Automatic bending machine for thermoplastic sheet
Automatic Bendinig Machine produced by MALCOMPLAST ENGINEERING,is the best and most advanced machine for bending thermoplastic (PMMA,PVC,PS,PP,PC) Sheets in the market. Robust and of an attrattive design, this machine has been created to solve and satisfy any bending requirement, eliminating the traditional operations of positioning the pieces on appropriata templates after heating. The Piegaplast Automatic is fully automatic and requires no manual interventions except for loading and unloading the piece
TECHNICAL FEATURES:
Simplicity of use and excellent perfomances (bending speed and precision) make the Piegaplast Automatic a high quality economical machine. Set the heating and cooling time and the bending angle on the electronic displays, position the sheet, lock the piece by means of a push-button or pedal and start the working cycle, with the result that, provided there are no defects in the sheets, the machine will carry out perfectly straight and even bends at the angle required.
- Radiancy heating with quartz-clad resistors
- Lower or bilateral heating
- Electronic heat adjustment for every resistor
- Electronically-display adjustment of heating time
- Electronically-display adjustment of cooling time
- Cooling device adjustable by means of air ventilation
- Operating cycles - manual or automatic
- Metric square for piece positioning
- Blinking led for cycle start
- Safety devices to EEC Standards (Photoelectric cells)
- Electric power supply 380 V. TRIF
- Pneumatic feed 6 Atm
- Electronic bending angle with display 0 to 135° (180°)
- Heating zone width 5 to 50 mm
|
PIEGAPLAST AUTOMATIC
|
2000
|
2000 S
|
|
Max bendable length
|
2050 mm
|
|
Max bendable thickness
|
5-6 mm
|
12 mm
|
|
Weight
|
450 Kg
|
550 Kg
|
|
Overal dimension lenght
|
2750 mm
|
|
Overal dimension width
|
1250 mm
|
|
Overal dimension height
|
1050 mm
|
1250 mm
|
|
